WORKBOAT AND BARGES

We have 3 multi-purposes works boat in our fleet. These workboats are equipped with cranes of 10tons each, given it the advantage for water lifting. Also designed in the workboat is the A frame attached to a winch which is used in the lifting of anchors and other water heavy loads.

Our ramp barge is of 1000 tons capacity. This barge is cable of transporting heavy duty equipment and support of marine logistics.

Our Muilt-Purpose Works Boats are specified.

Azikel MultiCatWorkBoat(MV ALLWELL)
Model No: TEQ-4115-2-550

Preliminary specifications

General

• Overall Length
• 40’ -9”(12.42m)
• Overall Width
• 14’ -11 ½”(4.46m)
• Maximum air draft
• 29’(8.84m)
• Hull depth
• 6’(1.8m)
• Boat Fuel capacity
• 400 gallons (1614liters)

Construction

• Deck and sides:
• ¼”(6.35mm)
• Bottom:
• 5/16”(7.94mm)
• Engine room bulkhead:
• 3/8”(9.53mm)
• All other bulkheads:
• ¼”(6.35mm)
• Headlong and Transom
• ½”(12.7mm)
• Framing:
• 3” x 2” x ¼” angle on 24” center (73.2mm x 50.8mm x 6.35mm-609.6mm)

Pilot House and Crews’ Quarters

1. All steel construction fully enclosed
2. Controls located in pilot house
3. Space to mount customer supplied sonar survey equipment, radio, GPS and cooking hotplate with power outlets
4. A/C installed in pilot house and crews’ quarters
5. Sleeping accommodation for 4 crew members
6. Sink and toilet

Engines (2)

1. Twin caterpillar model C9 industrial style diesel engines with continuous rating of 275bhp(205bkW) @200 RPM each
2. Caterpillar premium gages and alarms
3. Exhaust silencers – 6”(152mm)
4. Keel cooling